 |
STEELDECKTM
An
Environmentally Sound,
Lifetime Surface for Your Dock
Designed For Compliance With
The Clean Marina
Program's Best Management Practices
STEELDECK's patent pending design delivers an ultra strong,
environmentally-friendly decking surface with a life expectancy of up
to 50 years that requires near zero maintenance under even the
toughest fresh and saltwater conditions.
Designed For Durability, Safety And Comfort
At the core of STEELDECK is 14-gauge virgin steel combined with 35% recycled
steel. On its surface is a field-proven weather resistant PVC coating that
is textured to provide an all-season slip resistant deck.
Additionally,
STEELDECK panels are perforated for fast run off of surface water, snow and
ice; to dissipate lift pressure from storms and turbulent water action; and
provide light penetration from above. And the insulating properties of the
PVC coating leave the surface cool to bare feet even in the heat of the
Arizona sun.
Unmatched Panel Strength With Flexible Panel Sizes
STEELDECK panels accommodate stringers spans of 24"(60.96 cm) on center while
supporting up to 2915 lbs/ft2 / 1322.2 kg/m2. Where building codes allow, new
dock construction cost may be reduced significantly with these greater
spans.
With seven
standard rectangular panel sizes ranging from 24" x 48" to 48" x 72"(60.96x121.92
to 121.92x182.88 cm)and a
45 degree corner, STEELDECK panels make your decking projects fast and easy.
Panels can be cut with conventional tools to fit around pilings and roof
supports. Exposed steel is simply re-coated using a patch tube of the same
PVC product that air dries quickly to form a complete waterproof seal.
STEELDECK Is An
Environmentally-Friendly,
Cost Saving Solution
For Your Docks
The
expected life of a STEELDECK panel is 40 to 50 years. This far exceeds the
15 year life expectancy, or less, of other decking
materials that will need to be replaced two or three times during
STEELDECK's lifetime. And ongoing maintenance on STEELDECK is near-zero. So
STEELDECK not only protects you against the cost of multiple re-decking
projects and regular maintenance costs, but it also saves on landfill and
recycling charges common with other decking types. A marina or dock system
with STEELDECK is truly a clean marina
Panels Install 6X Faster Than Other Decking
STEELDECK can be installed typically in 1/6 the time of traditional
decking materials and without the waste common from cutting wood
and composite decking. Waste that you are paying for.
Panels can be attached to dock frames through pre-drilled mounting holes with as few as four TEK screws on steel
or aluminum frames. With some dock frames and building code compliance
panels may be laid in place without fasteners. In either case panels can be
removed or lifted easily for access to under dock utility runs.
Panels can also be cut to fit around pilings, roof supports and other
obstructions. Any exposed steel edges can then be coated using the
PVC vinyl patch kit that comes with your STEELDECK shipment. And
with panel widths of 2', 3' and 4'(60.96, 91.44, 121.92 cm) and panel lengths of 4', 5' and 6'(121.92,
152.4, 182.88 cm), you'll be surprised with how fast your new deck can be installed.
STEELDECK Can Add Strength to New or Old Dock Frames
Whether you are resurfacing existing dock frames or new frames, STEELDECK can become a structural member of your dock
system when fastened to your frames at all points of connection that are provided in the STEELDECK panel.
Field-Tested PVC Coating and Perforations
Provide Safe Slip-Resistant Surface
Actually it's better than that! STEELDECK's slip-resistant PVC coating is
KID-tested. This is the same PVC material and coating process that has been
used on commercial-grade playground equipment for over 20 years. No better
test than a couple hundred kids at recess every day. STEELDECK is also
perforated for fast run-off of surface water, snow and ice; and to minimize
the lifting effects of wave splashes and surges from under the dock.
And the perforations let light penetrate to the vegetation and aquatic life
residing under the dock. |
Includes panel
dimensional drawings
- Design Criteria
- Meeting Requirements
- Best Return on Investment
- How's SteelDeck Made
- Where is it used?
Who is using SteelDeck?
Here is a partial list of resorts and marinas now using
SteelDeck.
Apache Lake Resort & Marina... Apache Lake...Tortilla Flats,
AZ
Callville Bay Resort & Marina... Lake Mead...Las Vegas, NV
Havasu Springs Resort... Lake Havasu...Parker, AZ
Las Vegas Boat Harbor... Lake Mead... Boulder City, NV
Pleasure Cove Marina... Lake Berryessa... Napa, CA
St. Paul Pool and Yacht Club... Mississippi River...Lilydale, MN
River Heights Marina... Mississippi River...Inver Grove, MN
Rough Canyon Marina... Lake Amistad...Del Rio, TX
STEELDECK Prices and Specs
We apologize for not being able to provide
pricing online. Actual delivered prices can vary significantly
depending on your location, the location of our warehouses in
relation to you, and the actual shipping costs in today's
fluctuating fuel market.
Price Request
Please contact us by telephone at
1-800-262-2275 or by Fax at
1-763-785-1509 for pricing.
Product Specifications and FeaturesCore composition: 14 gauge steel,
Made in USA
Recycled contents: 35%
Recyclable:
Yes
Surface coating: Textured, weather resistant PVC
PVC colors:
Tan and grey
Joist span:
24", 36" or 48"(60.96, 91.44, 121.92 cm)
Load rating*:
2' on Center - 2915 lbs/ft2
(60.96 cm on center - 1322.2kg/m2
Expansion: 1/32” over 4ft. in 120F heat
(0.03938 cm over 60.96 cm in48.9C heat)
Anti-Skid: Excellent
Fire rating: ASTM E84, will not continue
to burn
Salt spray resistance: Passed ASTM B 117
Abrasion resistance: ASTM F510, no visual surface changes
Impact resistance: ASTM D2794, no visual surface changes
Freeze-thaw resistance: No change
Oil and gas resistance:
Excellent
Fungal/Mold resistance: Excellent,
no decay
UV resistance:
Excellent
*while staying within elastic range
Seven Panel Sizes Available in Tan or Grey
Model Dimensions
24481 2' x 4' x 1 5/8” (60.96x121.92x4.128cm) 41lbs/18.6kg
36481 3' x 4' x 1 5/8” (91.44x121.92x4.128cm) 60 lbs/27.22
kg
36721 3' x 6' x 1 5/8"
(91.44x182.88x4.128cm) 90 lbs/ 40.82 kg
48481 4' x 4' x 1 5/8”
(121.92x121.92x4.128cm) 85 lbs/ 38.56 kg
48601 4 x 5' x 1
5/8” (121.92x152.4x4.128cm) 90 lbs/
40.82 kg
48721 4'x 6' x 1 5/8”
(121.92x182.88x4.128cm) 119 lbs/ 53.98 kg
48TRI 45 Degree Corner
Easy to Install and Easy Access to Utilities Post Install
Under dock utilities can be difficult to access and time
consuming with some decking products. STEELDECK panels can be
lifted easily to expose a larger area under the decking for any
utility work needed.
Panel Cutting
Panels are easy to cut to fit around pilings, power pedestals,
roof supports and other walkway obstructions. Vinyl patch can be
applied to freshly cut edges to seal them against weather and
water.
 |
|
